OPERA TIONS

This chapter intended a general overview

Using the

Co-Pilot®

Note : T urn the ignition key the position before operating the -

When the ignition key turned the position, the - Pilot® automatically turns on. The MACK LOGO INTRO screen (refer Figure 40) appears for several seconds and usually followed the last Anytime screen that was active prior powerdown. vehicle management and control - MAC) programmed key - for theft deterrence (refer Figure 41), then the CHANGE DRIVER screen (refer Figure 52) will appear . Messages the screen will prompt the driver press the Enter ( ↵ ↵ ↵ ) button accept the driver use the - Pilot® stalk switch enter a password.

Remember press and hold the Enter ( ↵ ↵ ↵ ) button before beginning a trip make the stationary MAIN MENU screen appear .

Note : the screen black, press the Enter ( ↵ ↵ ↵ ) button the stalk switch turn on.

Note : also possible retrieve engine hours and odometer readings with the ignition OFF; simply press and hold the Enter ( ↵ ↵ ) button the stalk