Safety instructions, Signs on the machine
Operating manual
Safety Instructions
in accordance with EN474-5:2006+A3:2013. The appropriate operating weight set for the tip over protective structure can be found on the information sign in the
Note The determined operating weight can be f (in forward right travel direction). When working tools and attachments are fitted, make sure that the total weight of the machine is less than the weight for which the tip over protective structure has been certified. With a higher operation weight, there is no protection against tipping over.
Avoiding accidents
total weight certified for the tip over protective structure being exceeded:
incidents:
Avoiding injuries will only protect the operator if the safety belt is fastened. s cab, for example installation of
area. Loose objects must be stored securely.
Roll-over protective structure (ROPS) protection in the event of the machine rolling over, up to a certain operating weight, in accordance with ISO 12117-2:2008. The appropriate operating weight set for the roll-over protective structur cab. Note The determined operating weight can be f (in forward right travel direction). When working tools and attachments are fitted, make sure that the total weight of the machine is less than the weight for which the roll-over protective structure has been certified. With a higher operation weight, protection is only provided against tipping over.
copyright by
2 - 14
MJFCIFSS
R 906 Classic / 10359873
