Control and operation

Operating and control elements

1 Safety lever- Servo control S5L Push button for rotating device left (grapple, shear, ...), or unlocking of cylinder cut-off (NA)

3 Right joystick S5M Horn

4 Left joystick S5R Push button for rotating device right (grapple, shear, ...) or travel alarm on/off (NA)

5 Pedal for left travel gear S6L Push button for lifting magnet or rotating device left (NA)

6 Pedal for right travel gear S6M Push button - reserve

9 Pedal for special attachment control * or rotating device right (NA)

10 Positioning swing brake * S55 g of cylinder cutoff or lifting magnet (NA)

15 Controls for optional equiments * S57 Switch / reserve

Diesel engine emergency start A3 Radio *

RPM adjustment during emergency operation

Safety mode of the servo circuits H1 Monitoring display

E8 Cigarette lighter

Push button / Central lubrication H10 Buzzer P5 Hourmeter

Control unit - air conditioner S1 Ignition key S2 Control unit

* Optional equiments (NA) This location only for North America

3.1.2The joysticks Control of the working movements

Fig. 3-2 Joystick right (3) and left (4) Standard control system according to ISO

The left joystick 4 controls the stick and swing movements:

4 towards a resp. b to move the stick in resp. out.

4 towards c resp. d to swing the uppercarriage to the left resp. to the right.

The right joystick 3 controls the boom and bucket or grab movements:

3 towards e resp. f to tilt the bucket in or close the grapple, resp. to tilt the bucket out or open the grapple.

3 towards g resp. h to lower resp. to lift the attachment.

Special control systems

Note!

The machines are always delivered with the above described control system according to ISO standards. system (Liebherr resp. John Deere control system, ....).

The operator can activate the special control system using the switching lever situated on the floor of the cabin, under the right joystick.

See also "Special control system of the joysticks" in this chapter.