SERVICE MANUAL FOR TC213F
IV. FRONT TRANSMISSION AND CLUTCH 1. DISASSEMBLY
Fig. 4-3
(1) Remove the transmission assembly from the tractor. (2) Remove the front transmission cover referring to the figure above. 2. INSPECTION 2.1. MAIN CLUTCH a. Case assembly Fig. 4-4
– Replace the case assembly if it has a damaged or worn friction surface. – If there is any damage to the case assembly and the piston seal ring, these parts should also be replaced. b. Friction plates
36
– Inspection for deformation and burning – A seriously damaged or worn disc should be replaced with a new one. Inspection item Surface flatness
– Inspection for disc thickness and serration wear Inspection items Disc thickness Surface flatness
c. Separator plates
Specified valves 3.00 mm —
Usable limit 2.4 mm 0.2 mm
Specific valve —
Usable limit 0.2 mm
