Chapter 1 GENERAL INFORMATION INTRODUCTION
shields are secured in the proper operating positions BEFORE starting the engine to operate the machine.
This Operator’s Manual was written to give the owner/operator assistance in preparing, adjusting, maintaining and servicing the Compact Excavator. More important, this manual provides an operating plan for safe and proper use of the machine. Major points of safe operation are detailed in Chapter 2 Safety.
GEHL Company reserves the right to make changes and improvements in the design and construction of any part without incurring the obligation to install such changes on any unit previously delivered. The GEHL dealer network stands ready to provide any assistance that may be required, including genuine GEHL service parts. All service parts should be obtained from your GEHL dealer. Give complete information about the part and include the model and serial number of the machine. Record the serial number in the following space, as a handy reference.
Read and understand the contents of this manual completely and become familiar with the machine before attempting to operate it. Contact your GEHL dealer to obtain extra manuals or manuals in other languages. Throughout this manual, information is introduced by the word NOTE or IMPORTANT. Be sure to read carefully and comply with the message. Following such information will improve operating and maintenance efficiency, help to avoid breakdown and damage, and extend the machine’s service life.
Purchased from: ________________________ Date of Purchase: _______________________ Model No.: ____________________________ Serial No.: _____________________________
Do not use the machine for any application or purpose other than described in this manual. Consult your GEHL dealer before using special attachments or equipment with the machine other than those approved by GEHL. Any person making unauthorized modifications is responsible for the consequences.
Serial Number Location The serial number plate is located on the front frame, below the operator’s cab. See “Serial Number Plate Location” on page 1.
The use of the machine is subject to certain hazards that cannot be eliminated by mechanical means — only by exercising intelligence, care and common sense. Such hazards include, but are not limited to: hillside operation, overloading, load stability, poor maintenance and use of the machine for purposes for which it was not intended or designed.
Serial Number Plate
It is essential to have competent and careful operators, not physically or mentally impaired, who are thoroughly trained in safe operation and proper load handling. It is recommended that operators be capable of obtaining a valid motor vehicle operator’s license.
Figure 1-1 Serial Number Plate Location
Some illustrations in this manual may show doors, guards and shields open or removed for illustrative purposes only. BE SURE all doors, guards and Printed in U.S.A
1
908170/BP0307
