MAINTENANCE
1202
ENGINE
up)” on page 5 for engine oil grade requirements.
Checking Engine Oil Level: Tier 2 Engine John Deere 4045TF270 (SN AC02633 and up)
7. Install oil filler cap.
IMPORTANT:See “Fluid Capacities/Lubricants: John Deere 4045TF270 (SN AC02633 and up)” on page 5 for engine oil grade. To prevent damage to the engine, only use the engine oils specified, or oils of equivalent quality and grade. To check the engine oil, the machine must be on a level surface and the engine turned off.
Figure 5-3 Oil Fill, Dipstick, and Filter Location
1. Run the engine until it is at operating temperature, then turn the engine off.
Checking Engine Oil Level: Tier 1 Engine Yanmar 4TNE106T-NS (SN AB00473-AB03158)
2. Pull the engine cover latch handle (located at the left side of the operator’s seat) and raise the engine cover. See Figure 5-2.
IMPORTANT:See the lubricant list for engine oil grade. Only use engine oil specified, or equivalent quality and grade, or damage to the engine could occur. To check the engine oil, the machine must be on a level surface and the engine turned off. 1. Run the engine until it is at operating temperature, then turn the engine off. 2. Pull the engine cover latch lever (located next the right side of the operator’s seat) and raise the engine cover.
Figure 5-2 Engine Cover Latch Handle
3. Check the engine oil level using the dipstick located at rear of the engine (Figure 5-4).
3. Pull out the dipstick located in the middle of the engine. See Figure 5-3.
4. Add oil if required.
4. Wipe the dipstick with a clean, lint-free towel. 5. Insert the dipstick until it stops, pull out the dipstick and read the oil level.
IMPORTANT:The marks on the dipstick indicate the minimum and maximum oil levels. You must add oil if the oil level is below “minimum.” Do not add oil above the “maximum” level. 6. Add oil if required. Remove the oil filler cap from the engine and add fresh, clean engine oil. See “Specifications” on page 3 for engine oil quantity and “Fluid Capacities/Lubricants: John Deere 4045TF270 (SN AC02633 and 908170/BP0307
60
Printed in U.S.A
