BI632977
Maintenance _____________________________________________________ Monthly (optional) power fill filter
Change the power fill filter element (Fig. 39). If the element is extremely dirty, a more frequent interval may be required.
conveyor lift and tilt cylinders
Lubricate grease fittings on the rod and base ends of the conveyor lift and tilt cylinders. Pump grease into the fittings until new grease can be observed coming out of the pins.
crawler anchor pins
Lubricate grease fittings on both left and right side crawler anchor pins. Pump grease into the fittings until new grease can be observed coming out of the pins.
Fig. 39: Power fill filter and lubrication point location
Power fill filter
Tilt cylinder (s) (grease fitting located on rod and base end)
Crawler anchor pin (s) (grease fitting located inside crawler frame)
Lift cylinder (s) (grease fitting located on rod and base end)
________________________________________________________________ FB140 Feeder Breaker 5.58
