LUBRICATION/FILTERS/FLUIDS
Rinse the radiator and the expansion reservoir with clean water. STEP 5 Close the drain valve when the radiator is completely empty. Install the drain plug on the engine block. Fill it again.
Filling STEP 1 CK98M019
Fill the expansion reservoir to the “FULL” mark and install the cap. IMPORTANT : Use the correct coolant solution.
Run the engine at idle speed for about five minutes. Add coolant solution if the level in the expansion reservoir drops. CK98M021
IMPORTANT : Do not fill the expansion reservoir above the “FULL” mark.
Template Name: OM_1_col Template Date: 1994_04_29
Fill with coolant solution via the radiator until overflowing and install the radiator cap.
TRIM THIS EDGE
STEP 3
Alt= to hide template information Alt+ to display template information
STEP 2
STEP 4
143
TRIM THIS EDGE RIGHT PAGE
