Workpro 440 Operator Maintenance & Parts Manual - PDF DOWNLOAD

Page 17

OPERATION Read and Observe All Warnings Before operating this vehicle.

FUEL

Before starting. be sure all preliminary service is done and that you are familiar with the controls and know how to stop the vehicle.

(

OPERATOR QUALIFICATIONS Only trained and authorized operators shall be permitted to operate this vehicle. Operators of this vehicle shall be qualified as to visual , auditory, physical, and mental ability to operate the vehicle.

o

Move the choke lever to the CLOSE position. See the illustration below.

Note:

OPERATOR TRAINING An effective operator training program should center around user company's policies, operating conditions, and vehicle type. The program should be presented completely to all new operators and not condensed for those claiming previous experience.

The choke may not be needed if the engine is warm or the air temperature is high. LEVER

STOPPING THE VEHICLE • Set SHIFTING CONTROL in STOP position (lever straight up position). • Push the lift control forward and lower the lift frame to the bottom of the mast.

018-0007

o

Move the throttle lever down slightly. See the illustration below.

• Center the mast using the tilt lever next to (left of) the lift control. • Move the throttle to the idle position. • Turn engine switch fully counterclockwise to the OFF position. • Close the FUEL VALVE. Down

STARTING THE ENGINE Note:

o

14

Before stat1ing the engine and running the vehicle. familiarize yourself with the steering control handle operation to orient your mind and coordinate your steering hand movements.

Turn the fuel valve to the ON position. See the illustration below.

0 1 ~ 1 07

(


Turn static files into dynamic content formats.

Create a flipbook
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.