Maintenance
Lubrication System Oil change intervals can vary depending on oil grade and sulphur content of the fuel, please refer toTechnical Data, Lubrication System. Oil change intervals must never exceed a period of 12 months. If you want longer oil change intervals than given in the table Oil Grade and Oil Change Interval, the condition of the oil must be checked by the oil manufacturers through regular oil testing. P0002089
Oil level, checking and topping up The oil level must be within the marked area on the oil dipstick and must be checked daily before the first start.
1
MAX MIN
2
IMPORTANT! Do not fill over the limit for max. oil level. Use only oil of the recommended grade; refer to Technical Data page 120. 1 Fill oil slowly through the oil filler on top of the engine (1) or on the side (2), where fitted. 2 Wait 20 minutes to allow time for the oil to run down into the sump before checking the level again. 3 Check the oil level again. IMPORTANT! MAX oil level for engine installations up to 5° inclination is at the upper cross on the oil dipstick.
MAX 5
P0012085
76
47701352 04-2011
