New Holland F106.6 F106.6A F156.6 F156.6A GRADER Tier III Grader Operator's Manual 84282291 - PDF

Page 216

OPERATING INSTRUCTIONS F106.6 / F106.6A / F156.6 / F156.6A Fuel system Fuel system, safety instructions

Explosion hazard due to vapours Fuel vapours are readily flammable and may explode into flame. Therefore avoid any sparking and never use a naked flame, e.g. lighter or matches, for lighting. If you have to work on the fuel system: -

switch off the engine and auxiliary heating,

-

secure the machine,

-

avoid naked flames,

-

do not eat, drink or smoke while working.

2747273-en

Never use "biodiesel" "Biodiesel" may damage the injection system and the engine. Use only diesel fuel produced from mineral oil complying with standard specification EN 590. Further information can be obtained from your after-sales service.

Refuelling from cans If the machine is refuelled often or regularly with fuel from cans or barrels, there is an increased risk of foreign matter and water getting into the fuel system. In this case:

Potential health hazard

-

always refuel through a fine mesh;

Diesel fuel and any water/fuel mixture drained off are a potential health hazard.

-

drain off water from the fuel filter more often than specified in the maintenance schedule;

These fluids must never be swallowed.

-

drain off water and deposits from the fuel tank at shorter intervals;

Protracted contact with the skin must also be avoided.

-

replace all fuel filters at shorter intervals.

Avoid inhaling the vapours. Wear protective gloves or apply a barrier cream.

Avoid environmental impact Collect escaping fuel and discard in accordance with local environmental regulations. Discard fuel filters and fuel-soaked rags separately from other waste.

197


Turn static files into dynamic content formats.

Create a flipbook

Articles inside

Fault table – Working attachments

1min
pages 297-298

SN EN 590 class 0, January 2000

10min
pages 299-306

Fault table - Travelling gearbox (manual transmission

1min
page 295

Fault table - Brake system

1min
page 294

Fault table - Steering system

1min
page 293

Protection of electronic modules during welding operations

2min
pages 287-290

Floodlamp (7, Fig. 1

1min
page 282

Rotary beacon (option

1min
page 284

Checking / replacing the fuses

1min
pages 272-273

Number plate lamp (5, Fig. 1

1min
page 281

Assisted starting (with jumper cables

2min
pages 270-271

Air conditioner fault tables

3min
pages 261-264

Air conditioner – Checking / retensioning the compressor belt

1min
page 260

Location of components inside the machine

1min
page 259

Powershift transmission - changing the oil

1min
page 238

Service brake

1min
page 244

Rear axle – Checking the chain tension

1min
page 241

A front-wheel drive- changing the oil filter

1min
page 236

Changing a wheel

2min
pages 252-253

Battery storage

1min
page 228

Recharging the battery after removal from the machine

1min
page 227

Replacing the battery

1min
page 226

Warnings

1min
page 223

Cleaning the fuel tank

1min
page 220

Removing and installing the batteries

1min
page 224

Fuel tank, draining off water and deposits

1min
page 219

Bleeding the fuel system

2min
pages 221-222

Fuel prefilter water separator

1min
page 218

Fuel system, safety instructions

2min
pages 216-217

Main filter element

1min
pages 213-214

Dust removal valve

1min
page 212

Checking the coolant level

1min
page 211

Alternator/water pump drive belt

1min
pages 209-210

Engine hood

1min
page 205

Changing the engine oil

1min
page 207

Clutch-codes

5min
pages 166-169

Transmission fault codes

3min
pages 163-165

Vehiclefault Codes

20min
pages 151-162

Adjustment of driver's seat, safety instructions

1min
page 134

Service/Select menu

1min
page 140

Combination menu

2min
pages 145-148

Environmentally compatible hydraulic fluid, sampling

1min
page 133

Retaining belt

1min
page 139

Rear ripper (option

1min
pages 127-128

Blade ripper (option

1min
page 129

Front blade (option

1min
page 126

Securing the machine

1min
page 124

After daily use

1min
page 122

Readjusting the swivel arm

1min
page 118

Wheel rake

1min
page 119

Transport – Important instructions

1min
page 111

Brake-pressure-dependent transmission cutout (optional

1min
page 109

Setting off

1min
page 106

All-wheel drive

3min
pages 97-99

Floodlamps

1min
pages 90-91

Control elements in front

7min
pages 51-59

Main screen

3min
pages 45-47

Warning of special dangers

2min
page 31

Engine speed adjustment

1min
page 83

Run-in period

1min
page 70

operation, disposal of parts and consumables

2min
page 30

Warnings and symbols

2min
pages 25-26

Warranty

2min
page 24
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.