Readjusting the swivel arm

Readjusting the swivel arm

The swivel arm is locked in position 4, when the blade is in horizontal position (Fig. 6).

Readjusting the swivel arm to the left:

• Extend blade swivel cylinder with control lever (74, Fig. 8) completely. Set blade on the ground with control levers (75 and 76) to relieve the hydraulic system.

Fig. 6

Readjusting the swivel arm to the right:

• Retract blade swivel cylinder with control lever (74, Fig. 7) completely before setting the blade with control levers (75 and 76) on the ground to relieve the hydraulic system.

Fig. 8

• Disengaging the swivel arm lock. - To do so, depress button (104, Fig. 5) and hold. The locking pin disengages from the arm. - Bring swivel arm to positions 5 using control levers (74 - 76, Fig. 8). - Release button (104, Fig. 5) shortly before reaching position 5. The locking pin engages the corresponding detent by spring force.

Fig. 7

• Disengaging the swivel arm lock. - To do so, depress button (104, Fig. 5) and hold. The locking pin disengages from the arm. - Bring the swivel arm to one of the desired positions 1, 2 or 3 by means of control levers (74 - 76, Fig. 7). Release button (104, Fig. 5) shortly before reaching the desired position.

The locking pin engages the corresponding detent by spring force.