OPERATING INSTRUCTIONS F106.6 / F106.6A / F156.6 / F156.6A Retaining belt
10000094-en
Check the retaining belt and its fastening elements regularly. If the belt or its fastening elements are found to be damaged or if parts are missing, the belt must be repaired immediately or replaced by a new one. Damaged retaining belts or belts overstrained in an accident must be replaced. The opening of the belt buckle must not be blocked, for instance, by paper since the belt tongue can then not engage in the buckle. Do not run the retaining belt over firm or fragile objects as, for instance, keys or spectacles. Risk of injury in the event of an accident.
Fig. 1
The driver's seat is equipped with a lap retaining belt with retractor (1, Fig. 1). The automatic retractor/belt-tightener is installed on the left side of the seat. Put on the retaining belt before driving. Putting on the retaining belt Slide the tongue (2, Fig. 1) into the belt buckle (1, Fig. 2). Check by pulling on the belt that the tongue has properly engaged. The retaining belt must not be blocked or twisted. Opening the retaining belt Depress the buckle lock (2, Fig. 2) and pull out the belt tongue. The retaining belt is retracted automatically.
120
Fig. 2
