Operation Locking: attachments without hydraulic function
C
O
Secure the attachment with lock pins H of the quickhitch. To do this:
10
☞ Pull control lever 10 to the rear C. ➥ Lock pin H engages in the mounting holes of the attachment. ➥ Make sure the attachment is safely locked with lock pins H. ☞ Lock the 3rd control circuit. ➥ – see Operation of 3rd control circuit on page 81.
IMPORTANT! H
You must be able to see lock pins H on the left and right of the mounting holes on the attachment. The attachment is not safely locked unless you can see the lock pins.
Fig. 84: Locking the attachment
Locking: attachments with hydraulic function
☞ Turn off the engine. ➥ Do not turn off the ignition. ☞ Apply the parking brake. ☞ Unlock the 3rd control circuit. ➥ – see Operation of 3rd control circuit on page 81. ☞ Depressurize the 3rd control circuit. ➥ – see Depressurizing the quick-couplers on the loader unit on page 82. ☞ Attach the hydraulic and electrical connections (if used) for the attachment by following its Operator’s Manual.
Printed in U.S.A.
84
918293/BP1209
