OPERATING INSTRUCTIONS
LOWERING THE ATTACHMENT IN THE EVENT OF MACHINE FAILURE If the engine breaks down, use the following procedure to lower the attachment.
STEP 1
STEP 2
Turn the starter switch key to the “ON” position.
Lower the gate lock lever (gate lock in outward position).
STEP 3
CD00E111
Place the cont ro l lever (s) in the position corresponding to the downward movement required.
!
WARNING: The capability to lower the attachment in the event of machine failure is dependent upon a fully charged pilot circuit accumulator. Repeated use of the controls after a machine failure will deplete the accumulator charge.
111
TRIM THIS EDGE RIGHT PAGE Bur 6-25610
TRIM THIS EDGE
CD00E006
CD00E060
