LOWERING ATTACHMENT IN THE EVENT OF MACHINE FAILURE

LOWERING THE ATTACHMENT IN THE EVENT OF MACHINE FAILURE

If the engine breaks down, use the following procedure to lower the attachment.

STEP 1

CD00E060 Turn the starter switch key to the “ON” position. STEP 2

CD00E006 Lower the gate lock lever (gate lock in outward position).

STEP 3

CD00E111 Place the control lever (s) in the position corresponding to the downward movement required.

WARNING: The capability to lower the attachment in the event of machine failure is dependent upon a fully charged pilot circuit accumulator. Repeated use of the controls after a machine failure will deplete the accumulator charge.