IV. PREPARING TO OPERATE ATTACHING LIFT ASSEMBLIES
2
OR 5
1
1
3
4
FIG 4.10
Refer to the Hagie 204SP Parts Manual for
3. Attach the lift arms (fig. 4.10, item 1) to the
correct hardware when following these steps:
toolbar mounting bracket.
1. Attach the hoist column adapters (fig. 4.10,
4. Attach the lift arm cylinders (fig. 4.10, item 3)
item 2) to the tool bar and the outriggers at the
to the lift arms.
appropriate spacing. Refer to the Hagie
5. Attach the toolbar weldment (fig. 4.10, item 4)
204SP Parts Manual for information on spac-
to the lift arms.
ing.
6. Connect the hydraulic hoses to the lift cylin-
2. Attach the toolbar mounting bracket (fig. 4.10,
ders. Refer to the Hagie 204SP Parts Manual
item 5) to the hoist column adapters.
for the correct hydraulic schematics.
27
PREPARING TO OPERATE CONTINUED
