IV. PREPARING TO OPERATE ATTACHING LIFT ASSEMBLIES

Refer to the Hagie 204SP Parts Manual for correct hardware when following these steps:

1. Attach the hoist column adapters (fig. 4.10, item 2) to the tool bar and the outriggers at the appropriate spacing. Refer to the Hagie 204SP Parts Manual for information on spacing.

2. Attach the toolbar mounting bracket (fig. 4.10, item 5) to the hoist column adapters.

3. Attach the lift arms (fig. 4.10, item 1) to the toolbar mounting bracket.

4. Attach the lift arm cylinders (fig. 4.10, item 3) to the lift arms.

5. Attach the toolbar weldment (fig. 4.10, item 4) to the lift arms.

6. Connect the hydraulic hoses to the lift cylinders. Refer to the Hagie 204SP Parts Manual for the correct hydraulic schematics.