Operation Indicators and warning lights: overview Unfold page 37 for a better overview. 48 Indicator (red) – engine oil pressure Comes on if the engine oil pressure is too low, if the engine oil pressure is too low:
48
☞ Stop the machine. ☞ Turn off the engine immediately and check the oil level (➠ page 104). Comes on after the ignition is turned on and turns off after the engine runs. 43 Temperature indicator – engine and cooling oil Indicates the engine oil temperature. NOTE: The engine oil temperature must range from 176 – 248 °F (80 – 120 °C). The maximum permissible engine oil temperature is 266 °F (130 °C) (red section).
43
46 Indicator (red) – alternator charge function Comes on after the ignition is turned and goes out after the engine runs.
46
Comes on while the engine is running if: • The V-belt or charging circuit for the alternator is faulty. • The battery is not charged anymore (➠ page 110). 45 Indicator (yellow) – air filter Indicates air filter contamination. If the air filter is contaminated:
45
Have the air filter replaced by an authorized dealer. 66 Indicator (green) – right/left turn indicator on rear attachment Flashes repeatedly:
66
• When turn indicator 34 is used. • If there is an electrical connection to a front or rear attachment. 52 Indicator (blue) – high beam Comes on if high beam is turned on or during headlight flashing.
62
61 Indicator (yellow) – cold starter Comes on when the key in preheating start switch 14 is in position 2 (a glow plug preheats the air in the combustion chamber of the engine when the key is in position 2).
61
47 Indicator (red) – parking brake 47
Printed in U.S.A.
P
Comes on when parking brake lever 13 is applied.
41
918121/CP0807
