4 - ASSEMBLY
32. Connect the hoses (62) and (63) to the conveyor (56) by means of the clamps (65).
RAIL14TLB0682BA
16
RAIL16TLB0431BA
17
33. Remove the heat only fan control switch from the righthand side of the side console, retain the mounting hardware. 34. Install the HVAC temperature and the fan speed controller (70) into the right-hand side console with the previously removed hardware.
35. Install the inner cab roof panel and the right side panel with the trim buttons (54). Install the panels from the right and left posts inside the cab with the trim buttons (54). Install the operator's seat. 36. Follow the HVAC procedure to evacuate and charge the air conditioning system with the appropriate quantity of R134a air conditioning refrigerant. 37. Inspect the air conditioning system for any refrigerant leaks, after the system has been charged and cycled. 38. Install the operator's seat. Reconnect the battery master switch. Lower and close the engine guard. Remove the safety support strut and lower the loader attachment. Check the operation of the air conditioning system.
13 EN
