13 Field operation 13.1 Using the swather
13.1.4 Height adjustment of rotors (rake height) Mechanical height adjustment Use the height adjusting spindle to lower all rotors until the crop is taken up cleanly over the entire working width. Proceed as follows:
1
A
• Flip the spring clamp (1) upwards Fig. To lower the rotors: B
• Turn the crank (2) clockwise (direction A). 2
To raise the rotors:
• Turn the crank (2) counter-clockwise (direction B). 66172
33
Note! This setting can be affected by vibrations during field operations.
• When the adjustment has been made, secure the
2
crank (2) with the spring clamp (1). (Fig. 33, 34) 1
66172
136
34
BA LINER 3000 - 0293 133.6
