15.2. Maintenance schedule

15.2 Maintenance schedule

Maintenance work

Gear drives:

–Check all gear drives for leaks Rotor drive, page148: –Check level of low-viscosity grease, and fill up if necessary Angle drives, page154: –Check oil level

before harvest daily Maintenance intervals after the first every 10 100 50 100 250

operating hours operating hours annually = every 500 oper. hours as necessary

–Oil change ● ●

Brakes, page160 –Vent the compressed air tank ● ● –Clean the element of pneumatic air filter ● ●

–Check stroke of brake cylinder, and adjust, if necessary –Check operation of the brake system –Visual check of the brake system ● ●

Tyres, page171 –Check tightness of wheel nuts and bolts, and retighten, if necessary –Check/correct the tyre pressures Adjustment work, page163 –Check/re-tension the flotation springs ● ● ● –Check/re-tension rotor flotation springs ● ● ● –Check/adjust the reed switches ● ● –Check/adjust the speed sensor. ● ● –Check/adjust the angle encoders. ● ● –Check/adjust the speed sensor. ● ● –Checking the track ● Hydraulics, page172 –Check/replace the hydraulic hoses ● ● ● –Replace filter element ● ● Fixing elements, page173 –Check tightness of all bolted joints, and retighten, if necessary ● ● ● ● –Check tightness of tine fixing screws, and retighten, if necessary ● ● ● –Check/replace all connecting elements ● ● ● ●