12 Operation – Control terminal 12.3 Manual control
12.3.4 Raising/lowering the rotors Attention! The rotors can also be raised to the transport position with the manual mode. The front rotors may collide during this operation. – Retract front rotors first before raising them to the transport position. Raise the rear rotors
Lower the rear rotors
Lower the front rotors
Raise the front rotors
73706
• Hold the corresponding key down until the 20
required position is reached. Note! The raising height is not limited in the manual mode.
(Fig. 20, 21)
21
0293 133.6 - BA LINER 3000
113
