Case CX460 Crawler Excavator Operator's Manual 6-32531 - PDF DOWNLOAD

Page 196

MAINTENANCE/ADJUSTMENTS

AIR CONDITIONING (optional) Clean the intake filter....................................................................... Every 50 hours Clean the air recycling filter ............................................................. Every 50 hours Replace the filters ....................................................................... Every 5000 hours Have checked by a specialist ......................................................... Every 6 months The components of the air conditioning system need servicing at regular intervals. Make sure these intervals are respected, in order to ensure the air conditioning functions correctly and with maximum effectiveness. The air conditioning system contains gas which is subject to strict legislation. Any defect in the system must be fixed rapidly.

!

WARNING: Never try to service the air conditioning system yourself. For any service work, consult your CASE Dealer.

NOTE: Operate the air conditioning system at least once a week, if only for a short time. See "Air conditioning", in the "Controls/Instruments/Accessories" Section.

Drive belt

TRIM THIS EDGE

Inspection In order to ensure the air conditioning functions correctly, inspect the air conditioner using the procedure outlined below before starting work.

Condenser

Alt= to hide template information Alt+ to display template information

Service specification

IMPORTANT: Never use water under pressure to clean the condenser.

CD02A022

Use your finger to exert pressure of around 10 kg on the centre of the drive belt. The tension slack should be between about 8 and 10 mm. If necessary, adjust the belt tension.

193

TRIM THIS EDGE RIGHT PAGE

Template Name: OM_1_col Template Date: 1994_04_29

If the condenser is dirty it will not dissipate heat properly. Clean the condenser in water.


Turn static files into dynamic content formats.

Create a flipbook

Articles inside

STORING THE MACHINE

2min
pages 210-211

ALPHABETICAL INDEX........................................................................223

1min
pages 229-232

STORAGE ............................................................................................... 207

1min
page 212

CONNECTING BOOSTER BATTERIES

1min
page 207

REPLACING A BACKHOE BUCKET

1min
pages 186-187

MAINTENANCE/ADJUSTMENTS ........................................................... 173

1min
page 202

REPLACING A TOOL ON A HYDRAULIC BREAKER

1min
pages 189-190

CHECKING THE QUICK COUPLER LATCHINGHOOKOPENING

1min
page 194

SHIMMING THE BACKHOE BUCKET

1min
page 188

AIR CONDITIONING

2min
pages 196-198

BATTERIES

2min
pages 205-206

TEETH AND TOOTH TIP WEAR LIMITS

1min
page 185

FAN AND ALTERNATOR DRIVE BELT

1min
pages 180-181

TRACKS

3min
pages 176-178

SWING REDUCTION GEAR

1min
pages 173-174

COOLING SYSTEM

2min
pages 151-153

RELEASING PRESSURE IN THE HYDRAULIC SYSTEM

1min
page 157

FUEL SYSTEM

2min
pages 154-156

AIR FILTER

2min
pages 169-172

ENGINE

2min
pages 148-150

HYDRAULIC BREAKER OR HIGH FLOW HYDRAULICCIRCUITS

2min
pages 113-116

GREASING THE HYDRAULIC BREAKER

1min
page 145

CHOICE OF TOOLS ON A HYDRAULIC BREAKER

1min
page 125

TRANSPORTING THE MACHINE

2min
pages 120-123

ENVIRONMENT

1min
page 137

SERVICING INSTRUCTIONS

1min
page 127

TOWING THE MACHINE

1min
page 111

PARKING THE MACHINE

1min
page 110

QUICK TOOL INSTALLATION AND REMOVAL

3min
pages 106-109

QUICK COUPLER INSTALLATION

1min
page 105

STOPPING THE ENGINE

1min
page 94

OPERATING THE BACKHOE BUCKET

1min
page 104

MACHINE TRAVEL

2min
pages 97-99

MACHINE OPERATION

2min
pages 95-96

LOAD HANDLING LIMITS

1min
page 102

ENGINE OPERATION

1min
page 92

STARTING THE ENGINE

1min
pages 89-90

BRINGING THE MACHINE UP TO OPERATINGTEMPERATURE

1min
page 91

ANTI-THEFT DEVICE

3min
pages 86-88

FUEL TANK FILLER PUMP

1min
page 80

LOAD HANDLING EYES

1min
page 77

OPERATING THE MACHINE

2min
pages 83-84

BEFORE OPERATING THE MACHINE

1min
page 82

RUN-IN PERIOD

1min
page 85

ENGINE HOOD

1min
page 75

SIDE DOORS

1min
page 74

LOWER FRONT WINDOW

1min
page 70

CAB DOOR

1min
page 39

SAFETY INSTRUCTIONS

17min
pages 17-28

WINDSHIELD

1min
page 69

STEPS AND ACCESS HANDLES

1min
page 40

TO THE OWNER

2min
pages 9-11

FUEL TANK

1min
page 72

IDENTIFICATION NUMBERS/MACHINE COMPONENTS ......................... 10

1min
page 16
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.