MAINTENANCE/ADJUSTMENTS
REPLACING A BACKHOE BUCKET
2. Stop the engine and remove the starter switch key.
CD00E099
5. Start the engine, disengage the attachment from the bucket and retain the linkage seals for re-use.
1. Make sure the bucket is in a stable position. CD00E096
3.
Remove the retaining rings and pins.
CD00E099
CD00E097
4.
Remove the bucket pins.
2. Install the linkage seals on the dipper bushing shoulders. Change them if necessary.
183
TRIM THIS EDGE RIGHT PAGE
TRIM THIS EDGE
Installation
Template Name: OM_1_col Template Date: 1994_04_29
1. Place the bucket flat on flat, horizontal ground. Operate the attachment controls so that the dipper/bucket linkage pin is not gripped by the weight of the dipper.
Alt= to hide template information Alt+ to display template information
Removal
