4 - OPERATING INSTRUCTIONS
If the engine stops when traveling along a slope, immediately lower and indent the bucket (1) and the dozer blade (2) into the ground. Release all the controls, set the safety lever to the LOCK position, set the engine speed throttle to the low idle position, and then start the engine again. If the engine does not start, remove the starter key, and place the "Do not operate" tag on the machine controls. Get off the operator's compartment, and close the cab door. Block both tracks by means of wedges (3), and define a safe area of at least 3 m (9.8 ft) around the machine, cleaning this area from obstacles and bystanders. Call the CASE CONSTRUCTION dealer for assistance. SMIL16MEX3074AB
4-26
15
