SERVICING INSTRUCTIONS

Template Date: 1994_04_29Template Name: OM_1_col

Alt+ to display template informationAlt= to hide template information

TRIM THIS EDGE

LOAD HANDLING

WARNING: To use this machine for lifting a load, make sure that the machine is suitably equipped for the type of work. For this type of work, it is mandatory for the machine to be equipped with safety valves, an overload indicator, a load handling chart corresponding to the type of machine and to its attachment, plus a load fixing point.

WARNING: Always operate on firm, flat ground, away from any obstacles.!

Check that the load is stable a few centimetres from the ground before lifting it to any height. Movements must be safe and smooth when handling loads. Moving quickly does not mean moving in a violent manner.

When travelling with a load, always comply with the following instructions: - Place the upperstructure in line with the undercarriage. - Keep the load as near as possible to the undercarriage and the ground. - Always move at a slow speed, using the travel control lever.

What to do in the event of a hydraulic system failure

Shut down the engine immediately. Hold the control lever(s) in the position necessary for the attachment to be lowered as required and operate the emergency pump until the load is resting on the ground.

128

TRIM THIS EDGE

LEFT PAGE