OPERATING INSTRUCTIONS
QUICK COUPLER INSTALLATION (optional) Template Name: OM_1_col Template Date: 1994_04_29
!
WARNING: Never put your hands inside the quick coupler if the engine is running. Install the quick coupler on the dipper and on the connecting rod using the CASE linkage pins (1) supplied and then make the supply line connections.
1
CK99H002
TRIM THIS EDGE
IMPORTANT: The quick coupler can be used in conjunction with hydraulic hammers, but is not designed to with stand excessive vibration over long periods of the time. Is is therefore recommended to remove the quick coupler, to reduce the risk of premature wear, failures or breakage. If you do decide to use a hydraulic hammer, always orientate the hammer towards the machine and never use it as a lever, as the stress would be borne by the quick coupler cylinder.
Alt= to hide template information Alt+ to display template information 102
TRIM THIS EDGE LEFT PAGE
