RPV-3 software – USER MANUAL
Introduction The RPV-3 PC will be supplied with the RPV-3 software installed and configured. The RPV-3 RheoVisApp will open automatically when the PC is powered on. Version No. The software version number is displayed along the bottom of the white part of the screen.
Sample Preparation – concentration, units, density values Viscometer Measurement – sample details, START TESTING Result database – all measured and calculated results Check temperature against reference thermometer & temperature stability System Diagnostics – Engineer screen, backup and restore data
Close App
Home Page – shows test cycle including flow times and results System Configurations – methods, viscometers, assignments, bath & global Minimize or expand menu Note the software version is shown on the bottom of the white part of the screen: e.g. V2.03
The Configuration tool is password protected.
The Application is run from the C drive and the results folder is also located on the C drive. There is a backup and retrieval system for results, as well as the option to Network results. The backup function takes a back-up of the database file and stores it in a database format on backup drive.
PSL RHEOTEK VERSION 2.03
4
