RPV-3 software – USER MANUAL
The Auto viscometer cleaning mode will be activated if ticked (Viscometer Measurement). The box needs to be ticked either before START measurement or before the end of the measurement cycle. Auto cleaning can also be set up as a default in the viscometer settings.
If two viscometers are measuring flow times, cleaning will not commence before both positions have completed their measurement cycles.
Ad-hoc user activated cleaning If Auto cleaning is not activated, an Ad-hoc clean can be activated by the Operator from the Home page i.e. on completion of a measurement cycle. The Ad-hoc clean will use the parameters set up in the assigned method.
PSL RHEOTEK VERSION 2.03
43
