Maintenance plan (overview)
● ●
●
● ●
Exhaust gas turbocharger: clean compressor outlet
●
●
Check valve clearance, adjust if necessary
●
●
Check the fuel injection pump
●
●
Check the injection pressure
●
●
Check the injection nozzles 7
●
●
Replace fuel injectors
●
●
Empty the diesel fuel tank (to avoid condensation water)
●
Check battery fluid, fill up with distilled water if necessary, check for leaks, visual check
●
Check alternator, starter and electric connections, bearing play and function8
●
●
Preheating system, electric connections 9(replace heater plugs every 2 years)
●
●
● ●
Check wheels/tracks for cracks, cuts, check profile and air pressure
●
●
Check wheel nuts
●
●
Check track tension. Retighten if necessary
●
●
Check bearing play of tread rollers, track carrier rollers, front idlers Check piston rods for damage
●
●
●
Check screws for tightness
● ●
●
●
Pin lock
●
●
Attachment of lines (replace clamps if damaged)
●
●
Engine and engine suspension (replace suspension if damaged)
●
Check telltales for correct function
●
●
●
Tilt lock and gas strut of cab
●
●
●
Authorised
workshop
Customer
Every 3000 s/h
●
Replace toothed belt Check exhaust system for damage and condition
or 5 years max.
Every 1500 s/h
Every 1000 s/h once a year
Every 500 s/h
Check V-belt condition and tension (retighten if necessary or replace every 2 years)
Every 250 s/h
For service and maintenance work on the attachment, please refer to the operation and maintenance manual of the attachment manufacturer as well.
Every 50 s/h
Work description
Maintenance plan/service hours (s/h) Service work (daily)
SERV-HB 1101c cp EN – Edition 1.0 *1101c_cp311.fm
3.3
3-6
