Speed Control (option) – continuously adjustable low-speed control

3.3 Maintenance plan (overview)

Work description

For service and maintenance work on the attachment, please refer to the operation and maintenance manual of the attachment manufacturer as well.

Check V-belt condition and tension (retighten if necessary or replace every 2 years) Replace toothed belt Check exhaust system for damage and condition Exhaust gas turbocharger: clean compressor outlet Check valve clearance, adjust if necessary Check the fuel injection pump Check the injection pressure Check the injection nozzles 7 Replace fuel injectors Empty the diesel fuel tank (to avoid condensation water) Check battery fluid, fill up with distilled water if necessary, check for leaks, visual check Check alternator, starter and electric connections, bearing play and function8 Preheating system, electric connections 9(replace heater plugs every 2 years) Check wheels/tracks for cracks, cuts, check profile and air pressure Check wheel nuts Check track tension. Retighten if necessary Check bearing play of tread rollers, track carrier rollers, front idlers Check piston rods for damage Check screws for tightness Pin lock Attachment of lines (replace clamps if damaged) Engine and engine suspension (replace suspension if damaged) Check telltales for correct function Tilt lock and gas strut of cab

Maintenance plan/service hours (s/h)

(daily) Service work Every 50 s/h Every 250 s/h Every 500 s/h once a year Every 1000 s/h Every 1500 s/h or 5 years max. Every 3000 s/h Customer workshop Authorised