ME12002HYDRAULICSYSTEM

20.Position a socket onto bushing (414) and lightly tap it with a hammer until it is installed. See Figure 3-253.

NOTICE:Be sure that bushing (414) does not dislodge inside cover (201).

23.Tighten hexagon socket bolt (271) to the specified torque. See Figure 3-256.

NOTICE:Be sure that damping spring (336) does not lift cover (201).

22.Assemble cover (201) onto casing (102). See Figure 3-255.

NOTICE:Be sure that the parts are assembled in the same position as written down during step 11 of “Disassembling the Pilot Control Pedal” on page171.

NOTICE:Be sure that damping spring (336) does not lift cover (201).

24.Assemble block (420) onto cover (201), and in the same position as written down during step 8 of “Disassembling the Pilot Control Pedal” on page171. See Figure 3-257.

25.Manually press downward onto block (420) and insert camshaft (413) as shown. See Figure 3-257.

26.Apply grease to the bearing parts of camshaft (413).