SAFETY
●
Do not attempt to operate the hydraulic breaker unless you have first read and completely understand the safety messages and instructions in this manual and those of the hydraulic breaker manufacturer.
●
Operating the hydraulic breaker requires full attention and care on the part of the operator to avoid accidents. Know the hydraulic breaker’s capabilities, limitations and the working area required.
●
Every day, inspect the hydraulic breaker to detect any signs of oil or hydraulic fluid leakage. Tighten the connections or replace any defective components and grease as necessary.
●
Make sure the hydraulic breaker is in good condition. Never use a hydraulic breaker which is in poor condition or if there are components missing, as this could cause serious injury.
●
Make sure the maintenance procedures explained in this manual are carried out correctly.
USING THE HYDRAULIC BREAKER (optional) ●
Protect yourself and the vicinity from flying chips of rock.
●
Wear ear protection when working with the machine door or windows open.
●
Move everybody away before operating the hydraulic breaker.
●
Never immerse the hydraulic breaker in water as this could cause damage.
●
Never use the hydraulic breaker to sweep the ground to spread rubble, to push objects or carry out lifting operations.
●
Do not operate the hydraulic breaker with the attachment cylinders at the end of their stroke (extended or retracted).
●
Do not operate the hydraulic breaker if the tool is in contact with some part of the machine.
●
Place the tool against the object at a 90 degree angle. Avoid small irregularities on the object which will break easily and cause either idle strokes or an incorrect working angle.
●
Use a safety screen to protect yourself from flying debris. Keep the cab windows closed during operation.
19
TRIM THIS EDGE RIGHT PAGE Bur 6-25610
TRIM THIS EDGE
BEFORE USING THE HYDRAULIC BREAKER (optional)
