Operating manual
Control and operation Working with the machine
3.4 Working with the machine Working safely with the machine with the special features of the job site and any special precautions and warning signals. Examples of particular work environments would be on-site or traffic obstructions, the load-carrying capacity of the ground and any requirements to make the job site safe from public use. ground. reduced visibility and changeable ground conditions. power and gas lines on the job site and take particular care when working near them. If necessary, inform the responsible authorities. laws, regulations and rules applicable at the place of use. aerial lines. Do not allow the attachment to come near cables when working near electrical aerial lines. Risk of fatality! Inform yourself about required safety distances. the event of any transfer of electricity:
• warn any personnel in the vicinity not to come close to the excavator and not to touch it, the danger zone to a sufficient distance, solutely sure that voltage in the line, which had been touched or damaged, has been turned off! cured. lations and if necessary, ensure that the machine has been made safe as per regulations beforehand. ions of poor visibility or darkness. h the safety belt securely fastened (if available). mediately. st the brake system in accordance with the regulations given in the operating instructions. LEC/en/Edition: 12 / 2020
while the machine is moving. ed while the engine is running. ble and that there is no danger of overturning. Only known loads may be moved with the attachment; this applies particularly when using the grab. ngitudinal direction when moving and hold the load as close to the ground as possible. EXCEPTION: excavators used for loading and unloading, see the part "Safe use when loading and unloading (particularly when loading and unloading wood)" on
R 9250 E / 10360689
copyright © Liebherr-Mining Equipment Colmar SAS 2020
MJFCIFSS
3 - 77
