Safety instructions
Operating Manual
Safety Instructions
still using the three-point support and sit down in the
and close it immediately using the door handle, before tilting down the safety lever, and start the machine. is necessary to fasten your safety belt. If unavailable, let it be installed before working with the door open. three-point support and close the door as soon as you enter the cab. e safety belt (if available) before tilting down the safety lever, and start the machine.
Adjusting the operator’s standing position controls in such a way that you are able to work comfortably and safely. e must be set to the insulation position throughout operation.
Protection from vibration - seat adjusting
and height of the operator.
structions.
Utilisation in confined spaces el-operated heaters in adequately ventilated spaces. Before starting in closed areas, ensure adequate ventilation. Follow the regulations which apply for the particular area of use.
Starting the machine safely nd instruments for correct function, place l and tilt the safety lever up.
start the engine in accordance with the regulations given in the operating instructions. test all display and checking devices. tion. If necessary, open doors and windows to ensure sufficient fresh air supplies. ating temperature. Low oil temperatures make the control unit react sluggishly. is operating correctly. ea and then check the function of the travel and swing gear brakes, the steering and the signalling and lighting devices. Lighting devices must always be clean.
copyright © Liebherr-Mining Equipment Colmar SAS 2020
2-6
MJFCIFSS
R 9150 E / 12242219
