Operating Manual

Pedal for special and/or optional controls (if installed)

Last page

Adjustment solenoid valve of swing left

Adjustment solenoid valve of swing right

Joysticks left (L) and right (R) movements in all directions

Uppercarriage swing

Analog stick for special and/ or optional controls (if installed)

Submenu "Tool control" (optional)

This optional submenu is available when you can install special tools on the machine. Thus, when you connect a tool, you must use this submenu to select its related parameters (tool type, operating flows and pressures).

These parameters are set by a Liebherr service personnel.

Caution!

Risk of damage!

Incorrect setting of the operating flow and/or pressure can cause damage to the attachment or limited operation of the attachment.

Do the related procedure to select the correct parameters for the tool that you will install. Refer to the section "Attaching and dismounting equipment parts" of this manual.

Highlight for the parameters selection

Selected parameters

When you select a tool, a special message is also shown in the menu "Diag". To use this submenu, refer to the section "Attaching and dismounting equipment parts".

Operating and control elements

Submenu "Auxiliary hydraulic outlet" (optional)

This submenu is available when the machine has an optional hydraulic outlet. Thus, you use this submenu to stop the standard functions of the machine and directly supply hydraulic power to an external device.

Position of the attachmentHydraulic power supply in progress

Position of the safety leverHydraulic couplings removal

Hydraulic couplings connection

To use this submenu, refer to the section "Auxiliary hydraulic outlet".

Menu "Info"

This menu gives access to the submenus that follow: