OPERATING CONTROLS AND PROCEDURESRT540E OPERATOR MANUAL

CRANE CONTROL SYSTEM (CCS)

The RT540E is equipped with the electronic CCS (Crane Control System). CCS includes a control unit in the cab and several control units (MWSCM and MWCCM) distributed over the superstructure and carrier.

Crane Control System (CCS) Display

9Anti Two-Block Indicator

10Swing Brake Engaged Indicator

11Brightness Sensor

12Internal Temperature Warning Indicator

13Turntable Pin Swing Lock Control

Menu Control

The Jog Dial operates the CCS identically to the buttons on the display console, providing easier access for the operator. Spinning the jog dial performs the same function as the navigation arrow buttons on the display console. The icon in the lower left corner of the display screen reminds the operator which display is being controlled by the jog dial at that time. The Screen Toggle Button (4) (Figure3-13) is used to switch screens. The tab button can also be used to temporarily silence audible alarms. The functionality of the other buttons is different depending on the area, screen and menu.

ItemDescription

Figure3-13 Item Numbers ItemDescription 1Rated

1Escape Button

2Tab Button

3Menu Button

4Screen Toggle Button

5Jog Dial (Rotate dial to move cursor)

6OK/Enter Button (Press Jog Dial to select)

Turntable Lock Control (Pin Type)

The Swing Lock Pin Control Handle (13) (Figure3-12) is located beside the front console on the right side of the cab. The purpose of the swing lock pin is to lock the superstructure in position directly over the front for pick and carry loads. When the control handle is pushed down and the superstructure is directly over the front, the swing lock pin drops into the socket on the carrier frame, locking the superstructure in place. When the control handle is pulled

Ccs Main Screen Symbols And Icons

up, the pin is pulled out of the socket, unlocking the superstructure.

Sensors

There is a Temperature Sensor (12) and a Brightness Sensor (11) (Figure3-12). The Brightness Sensor automatically adjusts the brightness of all displays.