Auxiliary Hydraulic System Auxiliary hydraulics are used with attachments that have a mechanism requiring hydraulic power. Always be sure the auxiliary hydraulic control is in neutral before starting the loader or disconnecting the auxiliary hydraulic couplers.
WARNING
Standard-Flow Auxiliary Hydraulic Control Loaders are equipped with a standard-flow auxiliary hydraulic system with flatface couplers. The couplers are located on top of the lift arm on the left side. Hand/Foot and Joystick Control Loaders Equipped with Electric Auxiliary: The yellow thumb switch located on the righthand control controls the direction and amount of flow. The farther the switch is moved from center, the higher the flow to the auxiliary circuit. The direction of flow is reversed when the thumb switch is moved in the opposite direction from the center. Pushing the switch upward will pressurize the standard auxiliary male couFigure 17 Joystick Electric Auxiliary Control pler. For continuous operation, move the switch in either direction and push the red trigger button, located on the front of the grip for five seconds, and release. To cancel continuous operation, push the red button or move the yellow switch in either direction. T-Bar Control Loaders Equipped with Electric Auxiliary: A foot pedal is used to control the direction of hydraulic oil flow. Rotating the foot pedal to the right will pressurize the standard auxiliary inboard coupler. Rotating the foot pedal to the left will pressurize the outboard auxiliary coupler. Depress the pedal for approximately 15 seconds in either direction to detent. To stop the auxiliary detent flow, bump the foot pedal in either direction.
50950004/CP0714
Figure 18 T-Bar Auxiliary Control Pedal
41
