SAFETY 24. The platform must be fully lowered for personnel to enter and exit. Personnel must not climb on any part of the forklift in attempting to enter and exit.
Electrical Connection
25. Any harness, body belt, lanyard, or deceleration device that has sustained permanent deformation or is otherwise damaged must be replaced.
PWP Remote Shutdown Switch
26. Modifications to the platform that are detrimental to its safe use are prohibited. Remote Shutdown Switch with Coiled Wire Connector
WARNING Use ONLY an approved work platform for elevating personnel. NEVER move the machine with the work platform in a raised position or with personnel on board. NEVER tilt the platform forward, rearward, or to the side with personnel aboard.
PWP Remote Shutdown Switch
ALWAYS engage the PWP System and follow the Mandatory Work Platform Safety Rules when lifting personnel.
Wireless Remote Shutdown Switch on RS9-50 and RS10-55
Wireless Remote Battery Replacement
Work Platform Switch
PRINTED IN U.S.A.
25
1.
Remove the four screws from the cover of the wireless remote.
2.
Open the cover to gain access to the batteries.
3.
Remove the batteries from their holders.
4.
Install the replacement batteries in the holder taking care to position the battery terminals as shown in the diagram at the bottom of the battery holder.
5.
Replace the cover and install the screws to secure the cover in place.
50960200/A0521
