CHA PTE R 2 SPECIFICATIONS

All Dimensions are In Inches (Millimeters) Unless Otherwise Noted

Automatic Bale Counter

Dual Twine Tubes Wrapping System

Four-Ball Twine Box

Drawbar Hitch Jack

Throat Guide Baffle

Adjustable Dual-Position Axles

Selectable Features & Accessories

Auto-Electric Twine Tie System

Manual-Electric Twine Tie System

Automatic Chain Oiler

Pickup Gauge Wheel

Pressure Rollers Drive #60, #60H & #80 Roller Chain Main Drive . ................ #100HK Roller Chain

Pickup Drive .................... #60 Roller Chain

Standard Features:

20, Heavy Duty Steel, 12 (305) Dia. Pressure Rolls

Four-Bar Pickup with 20 Tines per Bar Automatic Reset Clutch on Pickup Drive

Bale Discharge Bumper

Crowder Wheel Kit

Set of Two 14 x 8.00 D.C. Wheels Only

Set of Two 15 x 10.00 D.C. Wheels Only

Set of Two Mounted IlL x 14, 6-ply Implement Tires on 14 x 8.00 Wheels

Set of Two Mounted 31 x 13.5 x 15, 6-ply Implement Tires on 15 x 10.00 Wheels

Chapter 3 Checklists

PR E-DE LIVERY

After the Baler has bee n com:Qletely set-up, the following inspections should be m ade b efore delivering it to the Cus tomer. Check off each item after prescribed action is taken. Ch eck that: o o o All fasteners and Wheel Lug Nuts are properly secured. o All Adjustments are made to comply with settings given in the Adjustment chapter of this manual. o Cylinders, Hoses and Fittings are NOT damaged, leaking or loosely connected. o Tires are properly mounted and inflated to pressure specified in the Service chapter of this manual.

Io Baler was NOT damaged in shipment. Check for such things as dents and loose or mlssing parts; correct or replace components as required.

All Grease Fittings have been properly lubricated and that the Gearbox is filled to the proper level. See Lubrication chapter of this manual.

All Guards, Shields and Decals are in place and securely attached.

D The Pickup Lever raises and lowers the Pickup without binding.

D The Serial Number for this unit is recorded in the spaces provided on this page and on page 2.

Following items are furnished attached to the Baler or in the Baler Twinebox:

D Hi tchjack

D (2) Gate Cylinder Locks

D Hitch Pin and Washers, Nut and Hairpin Cotterpin

D (1) Operator's Manual

Connect the Baler to a 540 RPM tractor and test· run it while checking that proper operation is exhibited by all components.

Check that:

D o The Pressure Rollers are turning freely. o The Rear Door opens and closes without binding. I acknowledge that pre-delivery procedures were perfonned on this unit as outlined above.

The Telescoping PTO Drive turns freely inside the Drive Shield Tubes.

D Hydraulic Hoses and all connections DO NOT leak: under pressure.

D All Drive Chains and Idler Mechanisms are operating smoothly and properly adjusted.

D The Pickup is operating freely and NO Tines are bent, rubbing andlor missing.

Dealership Name

Dealer Representative's Signature

Date Checklist Filled-out

Model Number

Serial Number

Delivery

The following Checklist is an important reminder of valuable information that MUST be passed on to the Customer at the time the unit is delivered. Check off each item as you explain it to the Customer.

o Give Operator's Manual to the Customer and instruct Customer to be sure to read and completely understand its contents BEFORE operating unit.

o Direct Customer on how to use the Index of this manual as a quick page number locating guide.

D Explain and review with Customer the SAFETY and Controls & Safety Equipment chapters of this manual.

o Explain that regular lubrication is required for continued proper operation and long life. ReView with Customer the Lubrication chapter of this manual.

D Explain and review the Service chapter of this manual.

o Demonstrate the proper use of the spring-loaded PTO Locking Coupler, the Rear Door Cylinder Locks, the Pickup Height Adjustment Lever, and the Hitchjack.

o Explain and review both the Operation and Preparing for Field Operation chapters of this manual. .

D Completely fill out the Owner's Registration, including Customer s signature and, return it to the GEHL Company.

I acknowledge that above points were reviewed with me at the time of delivery.

Customer's Signature

Date Delivered

(Dealer's File Copy)