DOS Flash Utility Perform the following steps to use the DOS Flash Utility: 1.
Press F2 during boot to enter the Setup Menu.
2.
Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move USB HDD to position 1. 1. IDE0 : WDC WD2500BEVT-22ZCT0
Information
Main
Phoenix SecureCore (tm) Setup Utility Security Boot Exit Item Specific Help
Boot priority order: 1: 2: 3: 4: 5: 6: 7: 8:
F1 Help ESC Exit
3.
Keys used to view or configure devices: Up and Down arrows select a device.
IDE0 : WDC WD2500BEVT-22ZCT0 CD/DVD: PCI LAN: Atheros Boot Agent USB HDD: USB FDD: USB KEY: USB CD/DVD:
Select Item Select Menu
F5/F6 Enter
<F6> and <F5> moves the device up or down.
C h a n g e Va l u e s Select SubMenu
F9 F 10
Setup Default Save and Exit
Execute the FLASH.BAT batch file to update BIOS.
The flash process begins as shown.
4. In flash BIOS, the message Please do not remove AC Power Source displays. NOTE: If the AC power is not connected, the following message displays.
Plug in the AC power to continue. 5.
32
Flash is complete when the message Flash programming complete displays.
Chapter 2
