6.2 Before Starting the Engine
!
If any controls, instruments, or devices do not function correctly report the defects to the proper personnel. Defects must be corrected before starting and operating the roller.
Remember to carry out daily maintenance before starting the engine. Refer to Section 7 - Maintenance.
Seat (Standard) Adjustment
Consider the following points before starting the engine:
Adjust the operator seat to the comfortable position so that the controls are within easy reach.
1. Before starting the engine, check inside, outside, and underneath the roller for people or obstructions.
The seat is adjusted in the following way:
2. Turn the Battery disconnector key (located on the right side of the operator compartment) to the on position. This supplies the roller with the power.
•
Length adjustment: Pull the length adjustment lever and move the seat forward or back.
Figure 6-3: Seat Adjustments
Figure 6-2: Battery Disconnector
A
Battery disconnecter
3. Check for warnings on the controls.
A
Length adjustment
4. Start the engine only from the operator position.
!
Do not leave the operator platform when running the engine and roller.
Inspections and Operations
40
