6.2 Before Starting the Engine
!
If any controls, instruments, or devices do not function correctly report the defects to the proper personnel. Defects must be corrected before starting and operating the roller.
Remember to carry out daily maintenance before starting the engine. Refer to section 7 - Maintenance.
Seat (Standard) Adjustment
Consider the following points before starting the engine:
Adjust the operator’s seat to the comfortable position so that the controls are within easy reach.
1. Before starting the engine, check inside, outside, and underneath the roller for people or obstructions.
The seat is adjusted in the following way:
2. Turn the battery disconnector key to switched on position which is located on the right side of the operator compartment. This supplies the roller with the power.
•
Length adjustment: Pull the lever and move the seat forward or back.
Figure 6-3: Seat Adjustments
Figure 6-2: Battery Disconnector
A
Battery disconnector
3. Check for warnings on the controls. 4. Start the engine from the operator position only.
A
Length adjustment
5. Avoid leaving the controls with the engine running. Never leave the operator platform while the roller is running.
Inspections and Operations
36
