CNH Hydraulic Standard Provision Kit 321F HS 321F STD W80C W80C HS Wheel Loader Instructions Manual

Page 10

5 - ASSEMBLY

NOTE: apply the angle orientation to the hose (18) and elbow (16) as shown in figure 5. NOTE: apply the angle orientation to the hose (17) as shown in figure 5.

LEIL19CWL0158FB

5

8. Secure the tubes (12) and (13) to the right side of front chassis by means of the two plates (9), the two clamps (8), the two washers (10), and the two bolts (11). NOTE: align the clamp side shown on the figure 6 (see arrow) to mark on tubes (12) and (13).

LEIL20CWL1046AB

6

10 EN

Turn static files into dynamic content formats.

Create a flipbook

Articles inside

NOTE: apply the angle orientation the hoses (17) and 18) shown in figure

1min
pages 8-9

Route the two hoses (14) along the right side the loader arm. Secure the two hoses (14) the loader arm means the two plates (9) , the two clamps (7) , the two washers (10) , and the two bolts .

1min
page 12

Reassembly the plate (P1) and the mounting blocks

1min
page 10

NOTE: apply the angle orientation the tubes (12) and 13) shown in figure

1min
page 7
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.