Reassembly the plate (P1) and the mounting blocks

from CNH Hydraulic Standard Provision Kit 321F HS 321F STD W80C W80C HS Wheel Loader Instructions Manual

NOTE: apply the angle orientation the tubes (12) and 13) shown in figure

NOTE: apply the angle orientation the hose (18) and elbow (16) shown in figure 5. NOTE: apply the angle orientation the hose (17) shown in figure 5.

LEIL19CWL0158FB 5

Secure the tubes (12) and (13) the right side front chassis means the two plates (9) , the two clamps (8) , the two washers (10) , and the two bolts . NOTE: align the clamp side shown the figure 6 (see arrow) mark tubes (12) and (13) .

LEIL20CWL1046AB 6

Reassembly the plate (P1) and the mounting blocks

Next Article

NOTE: apply the angle orientation the tubes (12) and 13) shown in figure

More articles from this publication:

NOTE: apply the angle orientation the tubes (12) and 13) shown in figure

NOTE: apply the angle orientation the hoses (17) and 18) shown in figure

Route the two hoses (14) along the right side the loader arm. Secure the two hoses (14) the loader arm means the two plates (9) , the two clamps (7) , the two washers (10) , and the two bolts .

This article is from:

CNH Hydraulic Standard Provision Kit 321F HS 321F STD W80C W80C HS Wheel Loader Instructions Manual