US
3 Fieldwork 3.3 CLAAS SEQUENCE MANAGEMENT 27198 67103
3.3.3 Recording Recording depends on the distance covered. Before starting recording: – Set the road travel switch to fieldwork. – Enable functions to be recorded, e.g.: - Enable automatic PTO shaft operation. - Connect implement to the hydraulic system. - Unlock the rear power lift. - Activate special steering program if required. Recording: Call up the Implement menu (1). 1
Call up the CLAAS SEQUENCE MANAGEMENT menu. Select and confirm the Record sub-menu. The windows on the CEBIS monitor display the standby recording symbol. 10 7076
Allocating the recording to a function key: Up to 4 operating sequences can be saved. 2
1
3 11 18016
– Select free or available function button F1 to F4. Function buttons that are assigned other functions are not available for such recording. - See CEBIS / Assignment of function buttons on the ground speed control lever menu. - Changing the function button assignment, see page 44. – Press the selected function key on the multifunction handle. The standby recording symbol (1) appears inverted. – Carry out the operating sequence. The recorded functions (2) are displayed on the CEBIS monitor as symbols. Finishing recording: – Push one of the function buttons for which the stop symbol (3) is shown on the monitor.
40
000 295 740 0 - BA CSM XERION - 01/08
