Assembly - pushed rear combination Check and observe after complete assembly and before commissioning.
CHECK AND OBSERVE AFTER COMPLETE ASSEMBLY AND BEFORE COMMISSIONING. Danger! Work on the machine only when the engine is at a standstill. – Remove the ignition key! 1. Before commissioning the machine: • Carry out tests in accordance with the operator's manual. • Check the pull rope settings. 2. Check that the screws are tight. 3. Prior to operation, lubricate the machine thoroughly. 4. Check the levels of grease and oil in the transmissions. 5. Check the machine settings. 6. Check safety features (e.g. overload clutch, drive component covers, etc.) for proper operation and correct seating. 7. Never let the machine run while unattended. 8. Direct persons out of the danger area; if persons approach the danger area, switch the machine off immediately. 9. Carry out a functional check of the machine. 10. Switch on the PTO drive only at idle speed. 11. Check for leaks.
00 0290 307 3 - ZBA/UBA DISCO 9300 C Duo / DISCO 9300 RC Duo / 8600 C Duo
71
