6. Adjustment - closed tailgate

A

B

C 27

28 6. ADJUSTMENT - CLOSED TAILGATE

6.1 Guide

–If the guide is in good condition and all points 3 are correct, continue with step "7. Adjustment - open tailgate". –If the guide is in no good condition and one points 3 is incorrect, continue with step "6.2 Adjusting roller 7".

6.2 Adjusting roller 7

Slacken the bolts M10 (A) on either side of the machine. Adjust roller 7 by means of the threaded pins on left (B) and right (C) hand side.

Adjustment direction

If the belts drift to the left in the guides of roller 7, raise the roller on the left hand side or lower it on the right hand side, so that the belts run in the middle between the guides.

Note!

The differences in length between the pins on right and left hand side must not exceed 15 mm.

(Fig.27,28,29)

29

6.3 Checking the guides

Repeat the test conducted in the step "5. Checking the belt guides".

Note!

The machine is now set-up for closed tailgate. Now the adjustment for opened tailgate must be made.