SERVICE AND REPAIR MANUAL Type : Drawing no.: Valid as of serial no. : Preparation of data : Author:
CL 19 Transfer case in CLAAS SFM Grassland machine VGZ 75-521 01 22.01.2007 Rauh
TABLE OF CONTENTS 1
1 GENERAL AND MAINTENACE
2
1.1
Introduction
2
1.2
Spare Parts Ordering
2
1.3
Parts Liability and Guarantees for safety related components
2
1.4
Work Conditions and Tools
3
1.5 Maintenance 1.5.1 Lubrication Table 1.5.2 Maintenance Intervals 2
1
4 4 5
REPAIR MANUAL
9
2.1 Exchange of Seals 2.1.1 Exchange of Output Flange Seals to front Axle 2.1.2 Exchange of Output Flange Seals to rear Axle
9 9 10
2.2 All Wheel Drive Release Shift 2.2.1 Exchange of Tapered Roller Bearing (No.7 & 27) 2.2.2 Exchange of Tapered Roller Bearing (No.1) 2.2.3 Exchange of Gaskets 2.2.4 Exchange of Output Shaft 2.2.5 Exchange of Shifting Sleeve 2.2.6 Exchange of Compression Springs
11 12 14 14 15 15 15
2.3 Transmission 2.3.1 Exchange of Input Pinion (3) and Bearing (4) 2.3.2 Exchange of Gear Block (23) and Bearings (20,25) 2.3.3 Exchange of Gear (29) and Bearings (27, 30) 2.3.4 Exchange of Shaft (36), Gear (33) and Bearings (32, 35) 2.3.5 Exchange of Shifting Sleeve (31)
16 16 17 19 20 22
2.4 Shifting Cylinder 2.4.1 Exchange of Gaskets (49, 50, 51) 2.4.2 Exchange of Cylinder (52) 2.4.3 Exchange of Shifting Rod (43) and Shift Lever (42)
23 23 28 28
2.5 Spring applied hydraulic released sliding calliper 2.5.1 Construction and function 2.5.2 Mounting and basic setting regulations 2.5.3 Basic setting regulation 2.5.4 Emergency release of the parking brake 2.5.5 Maintenance and repair work 2.5.6 General
30 30 31 32 33 34 38
1
